Home
On line
Catalogue
Tube
catalogue
Australian
distributors
International
distributors
Online hot quote
form
News
White Papers
Element
product
Element
production
Element
quality
Feedback
Grimwood Merchandise
Address
|
|
THE COMPANY
Grimwood Heating is a leading manufacturer of fan and blower heaters. Our modern plant, which is vertically integrated
with advanced levels of technology, gives us a competitive edge supplying the world’s leading OEM’s
in the heating element industry.
Our continuing focus is towards customer satisfaction, especially with regard to order response and technical
expertise.
Our facility is situated in Sydney, New South Wales.
With over three decades of export trading experience, our customer service team enjoys an enviable position for
quality service.
TYPE FL 13 - CENTRIFUGAL BLOWER HEATERS
Application
These models incorporate a fan speed control which provides continuously variable air volumes between max. & min.
speeds. Noise levels of the fan are relatively low, enabling these fan heaters to be used for comfort heating
and ventilation in a variety of commercial and industrial situations as well as process heating applications. |
Rating and Performance
These units have available a strong bracket for mounting to wall or ceiling and if desired, can be coupled
to a duct system.
- Every FL 13 Blower Heater incorporates the following features. . .
- Powerful 2.5 amp 240 volt electric motor, delivering up to 2400 m3/hr.
- Fan speed control unit, enabling the volume of air delivered to be continuously varied down to 700m³/hr
approx. This also varies air throw and air temperature (when used in heating mode).
- Over-temperature safety cutout and manual reset button. (Temperature of intake air should not exceed
50° C.)
- Optional swivel mounting to wall/ceiling bracket enables unit to pivot in horizontal plane.
- Contactors and complete internal wiring.
- Finned air heating elements for rapid heat dissipation, Elements rated at 240V for 3 phase, 4 wire star
connection.
- 700mm long x 450mm high x 360mm wide and weighs approx. 30kg.
- Optional wall/ceiling bracket measures 550mm x 300mm x 90mm Cat No. FL0100.
- Air throw of FL 13 blowers at maximum speed is approximately 20m.
|
|
TYPE BJ09 - AXIAL FAN HEATERS |
Application
BJ09 heaters provide a very low initial cost per installed kilowatt, create minimum draught but have maximum
resistance to physical impact (school halls, sports area, etc.). Whilst ideal for on/off operation in "fix
and forget" installations, their simplicity means that they can also be flexibly employed in many industrial
heating situations. Remote control may be achieved with the RU5600 separate control module. |
Rating and Performance
Blower heaters in this series are of heavy duty robust construction, are simple to operate and havethe
following features. . .
Fixed speed axial fan power by a 415 volt motor.
Delivers approximately 2250 cubic metres of air per hour under free air conditions..
Over-temperature safety cutoutwith automatic reset is included.
Fitted with adjustable front grille and protective rear grille.
Finned air heating elements for rapid heat dissipation. Elements rated at 240 volts for 3 phase, 4 wire
star connection.
Pairs of brackets available (optional extras) for mounting either to wall (Cat. No. FG09), or ceiling with
heater inverted (Cat. No. FG08).
Whilst normally used with an on/off switch, these units lend themselves to connection through a thermostat
and contactor for specific applications.
Dimensions 400mm long x 580mm high, 432mm wide.
Weight 24 kg approximately.
Air throw of BJ09 Blower Heaters is approximately 12 metres, resulting from a constant air velocity of
4.6 metres/sec.
|
|
RU5600 SEPARATE CONTROL MODULE |
|
Accessories
Wall mounted remote control module for use with all FL 13 models. Provides the thermostatic temperature
control of space being heated, Scale range 6/30°C. Module incorporates a system ON/OFF switch and heat ON/OFF
switch so allowing system to be used in fan only mode for cooling/ventilation. Fan speed control is effected
at the FL 13 unit itself with the integrally mounted control. |
|
|
